1085S NO electromechanical bolt lock 12V, NO (locks when voltage is applied), unique bolt lock

• Stainless steel mounting tape.
• Switchable actuation type: closes or opens when power is applied
• side load up to 15kg
• Suitable for doors opening on both sides
• 0-9 sec opening delay scheme
• Status NO/NC output
• Additional inputs for control

Brief Introduction:

• 1085S is an excellent electric motor bolt lock, adopts the up-to-date CPU control, changeable from fail secure to fail safe working mode. It is designed to be controlled with 3 wires. Positive voltage should be connected to DC power, and the monitor wire connect to power or unconnected to be power to lock or power to open. When choose the monitor wire to open, the locking or unlocking allowing the bolt to retract with up to 15kg of side load. The lock operates voltage between 12VDC and 24VD, low consumption, the lock working without getting hot. It is good at anti-prize and anti-jamming etc.

Technical Parameter:

Working Voltage: 12VDC-10%«24VDC+15% / 100mA  -120mA

Power to lock: 100mA

Power to open: 20mA

Bolt Dimensions:

• Diameter: – 11mm    
• Projection: – 20mm

Release under side load: 15Kg at bolt with motorized unlocking (3 wired control)

Operating Temperature: -10°C ~ +50°C

Power: 12VDC/1A

Lock Model: magnet inducing

Holding force: 1000Kg if the strike plate is fully supported

Inducing distance: 10mm

Service life: 3million times             

Lock material: stainless steel

Anti running Current: 800mA          

Lock dimension: 251*30*41mm