Tourniquet bidirectionnel électromécanique BTX 300 N1-D/100 CAME ÖZAK

Built on main carriers and supported with pipe beams on sides, consisting of waterproof and protecting top lid, mechanical compartment side panels and completely closed ceiling. Can be completely disassembled.

Three-section rotor (120°), each having 9 (10 in optional 2120 mm clear passage height) one-by-one demountable arms.

Optionally complies with UK H&S regulation of s98 mm gap between upright profiles.

Combination options with different material choices:

 Finishing: Orbital brushed matt (opt, electrostatic powder coating on stainless steel).

Operating Voltage: 110/220V AC 50/60 Hz. (=%10), 24V DC.

Consumption: about 8W at stand-by, max - 44W (varies according to the options and accessories used).

The system operates bi-directionally (entry-exit).

Operation modes can be changed through dip switch, PC and/or Android app.

Entry-exit controlled

Entry-controlled, exit free

Entry-free, exit controlled

Single input in both directions use

Entry-exit free

All functions, parameters and operating modes can be changed through the control board (microprocessor controlled), PC (Windows) and/or Android app. Firmware can be updated. All past function updates and changes are kept in the server and records can be traced.

All inputs are opto-coupler protected.

Controllable by dry contact (ground control).

Compatible with all kinds of access control devices.

Optional R$232, RS485 or TCP/IP module is available

Passage capacity (manual): max. 48 cycle/min. Nominal: ~25 pass/min.

Passage capacity (motorized): max. 40 cycle/min. Nominal: ~20 pass/min (nominal passage rate can change depending on the access control system utilized)