‎Dual-channel receiver RX-MULTI-300-868 Mhz 12/24V, suitable for constant and variable code remotes‎

‎Dual-channel receiver RX-MULTI-300-868 Mhz 12/24V, suitable for constant and variable code remotes‎

Brand selector

With 8 bits dip switch, the user can make different combinations for different remote brands. The brands' selection show as table 1.

Learn Button and LED

In RX -Mult receiver, there’re 2 independent channels. Each channel has an independent learn button S1, S2 and L1,L2.

Power Input Selector

The RX -Mult can be worked at the input AC/DC 12V~30V. However, it’s better to change the PIS according to the power input. If the input is great than 24V, shorten pin 2&3; shorten 1&2 if the input is less than 24V.

How to enter the remote and Erase all remote

Entry one button or remote:

1. First, selecting the correct brands for the remote will be entered by dip switch;

2. Press the learn button, the LED turn on. Press the button on the remote, and the LED flashes 4 times,t his button entry into the R X – Mult successfully.

3. Repeat step 2 for another button.

4. 2 channels work at the same.

Erase all data in the memory card:

Pressing and holding either learn button, the LED starts to flash. Keep holding and pressing this button until the LED turns off. All data in the memory card will be erased permanently. Notice: Be careful about erasing all data in the memory card. The data will be erased forever.